EFECTO DEL RECICLADO DE LAS FIBRAS DE LAS BOTELLAS PET EN LA RESISTENCIA DEL CONCRETO NORMAL

Autores/as

  • Darwin Quenta Flores Universidad Nacional del Altiplano Puno

DOI:

https://doi.org/10.26788/riepg.v9i3.1734

Palabras clave:

Fibras , botellas , PET, medio ambiente, reciclado, resistencia a la flexión, resistencia a la compresión

Resumen

RESUMEN

Hoy en día enfrentamos un problema sobre la protección ambiental, el estilo de vida moderno junto con las nuevas tecnologías causó más producciones de materiales de desecho para los cuales existe el problema de eliminación. Uno de ellos son las botellas PET que debe desecharse o reciclarse adecuadamente para mantener limpia el medio ambiente, ya que se clasifican como materiales no biodegradables. Para abordar este problema, se realizó un estudio experimental del efecto del reciclado de las  fibras de botella PET en la resistencia del concreto normal, fibras obtenidas mediante un reciclado mecánico. Se elaboró una serie de mezclas de concreto con adición de fibras PET de 0 % a 8 % estimada respecto al peso del cemento. Los concretos resultantes se compararon con el concreto normal (0 % de PET). Se analizó la  resistencia a la compresión y resistencia a la flexión del concreto respectivamente. Los resultados indican que para concreto con 2 % de PET alcanza su máxima resistencia a la compresión logrando un incremento de 2,6 % y el concreto con 4 % de PET disminuye en 6,3 %, no obstante, alcanza una resistencia superior a 210 kg/cm2. La resistencia a la flexión para concreto con 4 % de fibras de PET aumenta a 24 %. Por lo tanto, hasta 4 % de fibras de PET es posible adicionar para lograr una resistencia adecuada del concreto, método muy útil para resolver algunos problemas de desechos de PET en el medio ambiente.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Darwin Quenta Flores, Universidad Nacional del Altiplano Puno

Ingeniero Civil

Citas

REFERENCIAS

ACI - 318. 2014. Requisitos de Reglamento para Concreto Estructural (ACI 318S-14) y Comentario. American Concrete Institute (ACI). https://civilshare.files.wordpress.com/2016/07/aci_318s_14_en_espanol.pdf

Akçaözoǧlu S., Atiş C. D., Akçaözoǧlu K. 2010. An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. Waste Management, 30(2), 285–290. http://doi.org/10.1016/j.wasman.2009.09.033

Albano C., Camacho N., Hernández M., Matheus A., Gutiérrez A. 2009. Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios. Waste Management, 29(10), 2707–2716. http://doi.org/10.1016/j.wasman.2009.05.007

Aldahdooh M. A. A., Jamrah A., Alnuaimi A., Martini M. I., Ahmed M. S. R., Ahmed, A. S. R. 2018. Influence of various plastics-waste aggregates on properties of normal concrete. Journal of Building Engineering, 17, 13–22. http://doi.org/10.1016/j.jobe.2018.01.014

ASTM C150. 2001. Standard specification for Portland cement. Annual Book of ASTM Standards 04.01, pp. 149–155. https://www.astm.org/Standards/C150.htm

ASTM C33. 2016. Especificación normalizada para agregados para concreto. American Society for Testing and Materials (ASTM). https://www.astm.org/DATABASE.CART/HISTORICAL/C33C33M-16.htm

ASTM C39. 2018. Método de Ensayo Normalizado para Resistencia a la Compresión de Especímenes Cilíndricos de Concreto. American Society for Testing and Materials (ASTM). https://www.astm.org/Standards/C39.htm

ASTM C78. 2002. Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third–Point Loading). American Society for Testing and Materials (ASTM). https://www.astm.org/DATABASE.CART/HISTORICAL/C78-02.htm

Ávila L., Martínez-Barrera G., Barrera C., Ureña F., Loza A. 2013. Effects on Mechanical Properties of Recycled PET in Cement-Based Composites. International Journal of Polymer Science, 2013(1), 1–6. http://doi.org/10.1155/2013/763276

Borg P., Baldacchino O., Ferrara, L. 2016. Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete. Construction and Building Materials, 108, 29–47. http://doi.org/10.1016/j.conbuildmat.2016.01.029

Bui K., Satomi T., Takahashi H. 2018. Recycling woven plastic sack waste and PET bottle waste as fiber in recycled aggregate concrete: An experimental study. Waste Management, 78, 79–93. http://doi.org/10.1016/j.wasman.2018.05.035

Choi W., Moon J., Kim J., Lachemi M. 2009. Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles. Construction and Building Materials, 23(8), 2829–2835. http://doi.org/10.1016/j.conbuildmat.2009.02.036

Foti D. 2011. Preliminary analysis of concrete reinforced with waste bottles PET fibers. Construction and Building Materials, 25(4), 1906–1915. http://doi.org/10.1016/j.conbuildmat.2010.11.066

Frigione M. 2010. Recycling of PET bottles as fine aggregate in concrete. Waste Management, 30(6), 1101–1106. http://doi.org/10.1016/j.wasman.2010.01.030

Ge Z., Yue H., Sun R. 2015. Properties of mortar produced with recycled clay brick aggregate and PET. Construction and Building Materials, 93, 851–856. http://doi.org/10.1016/j.conbuildmat.2015.05.081

Gholampour A., Ozbakkaloglu T. 2018. Recycled plastic. New Trends in Eco-efficient and Recycled Concrete. Elsevier Ltd. http://doi.org/10.1016/b978-0-08-102480-5.00003-8

Kim B., Yi H., Kim Y., Kim J., Song, C. 2010. Material and structural performance evaluation of recycled PET fiber reinforced concrete. Cement and Concrete Composites, 32(3), 232–240. http://doi.org/10.1016/j.cemconcomp.2009.11.002

Mahdi F., Abbas H., Khan A. 2010. Strength characteristics of polymer mortar and concrete using different compositions of resins derived from post-consumer PET bottles. Construction and Building Materials, 24(1), 25–36. http://doi.org/10.1016/j.conbuildmat.2009.08.006

Mansour M., Ali A. 2015. Reusing waste plastic bottles as an alternative sustainable building material. Energy for Sustainable Development, 24, 79–85. http://doi.org/10.1016/j.esd.2014.11.001

Marthong C. 2015. Effects of PET fiber arrangement and dimensions on mechanical properties of concrete. IES Journal Part A: Civil and Structural Engineering, 8(2), 111–120. http://doi.org/10.1080/19373260.2015.1014304

Marthong C., Sarma K. 2016. Influence of PET fiber geometry on the mechanical properties of concrete: An experimental investigation. European Journal of Environmental and Civil Engineering, 20(7), 771–784. http://doi.org/10.1080/19648189.2015.1072112

Martínez-Soto E., Mendoza-Escobedo J. 2018. Comportamiento mecánico de concreto fabricado con agregados reciclados. Ingeniería Investigación y Tecnología, 7(3), 151–164. http://doi.org/10.22201/fi.25940732e.2006.07n3.012

Nibudey N. 2013. Strengths Prediction of Plastic fiber Reinforced concrete, 3(1), 1818–1825.

Nováková K., Å eps K., Achten H. 2017. Experimental development of a plastic bottle usable as a construction building block created out of polyethylene terephthalate: Testing PET(b)rick 1.0. Journal of Building Engineering, 12, 239–247. http://doi.org/10.1016/j.jobe.2017.05.015

Pelisser F., Montedo R., Gleize J., Roman R. 2012. Mechanical properties of recycled PET fibers in concrete. Materials Research, 15(4), 679–686. http://doi.org/10.1590/s1516-14392012005000088

Pereira De Oliveira A., Castro-Gomes P. 2011. Physical and mechanical behaviour of recycled PET fibre reinforced mortar. Construction and Building Materials, 25(4), 1712–1717. http://doi.org/10.1016/j.conbuildmat.2010.11.044

Shubbar D., Al-Shadeedi S. 2017. Utilization of waste plastic bottles as fine aggregate in concrete. Kufa Journal of Engineering, 8(2), 132–146. Retrieved from http://www.uokufa.edu.iq/journals/index.php/kje/article/view/6068

Siddique R., Khatib J., Kaur I. 2008. Use of recycled plastic in concrete: A review. Waste Management, 28(10), 1835–1852. http://doi.org/10.1016/j.wasman.2007.09.011

Yesilata B., Isike Y., Turgut P. 2009. Thermal insulation enhancement in concretes by adding waste PET and rubber pieces. Construction and Building Materials, 23(5), 1878–1882. http://doi.org/10.1016/j.conbuildmat.2008.09.014

Descargas

Publicado

2020-08-11 — Actualizado el 2022-05-17

Versiones

Cómo citar

Quenta Flores, D. (2022). EFECTO DEL RECICLADO DE LAS FIBRAS DE LAS BOTELLAS PET EN LA RESISTENCIA DEL CONCRETO NORMAL. Revista De Investigaciones, 9(3), 122–133. https://doi.org/10.26788/riepg.v9i3.1734 (Original work published 11 de agosto de 2020)

Número

Sección

Arí­culos Originales